Crane PULSE WATCH - Page 64

Main modes
64
6. To set the minutes, push the “ST./STP.” button (forward) or
the “SELECT” button (back).
7. Push the “MODE” button to confirm your selection.
The indicator “WAKE” will appear in the upper display
segment.
The hours will blink.
8. To set the hour when sleep mode should be automatically
deactivated, push the “ST./STP.” button (forward) or the
“SELECT” button (back).
9. Confirm your selection with the “MODE” button.
The minutes will blink.
10. To set the minutes, push the “ST./STP.” button (forward) or
the “SELECT” button (back).