Need help?Do you have a question about the Crate BLUE VOODOO BV-60 and is the answer not in the manual?
Power| output power rating | 60 watts RMS nominal @ 5% THD |
|---|---|
| power requirements | 115V 60Hz, 105W |
| fuse | 3A Slo-Blo |
Speaker Specifications| speaker size and type | 12” Crate 60 watt (1) |
|---|---|
| magnet weight | 38 oz. |
| voice coil diameter | 1 3/4” |
Impedance| input impedance | 1M ohm |
|---|---|
| speaker impedance | 8 ohm |
Weight and Dimensions| height | 19” |
|---|---|
| width | 20” |
| depth | 10 1/2” |
| weight | 48 lbs. |
Power| output power rating | 60 watts RMS nominal @ 5% THD |
|---|---|
| power requirements | 115V 60Hz, 105W |
| fuse | 3A Slo-Blo |
Speaker Specifications| speaker size and type | 12” Crate 30 watt (2) |
|---|---|
| magnet weight | 30 oz. |
| voice coil diameter | 1 3/4” |
Impedance| input impedance | 1M ohm |
|---|---|
| speaker impedance | 16 ohm |
Weight and Dimensions| height | 19” |
|---|---|
| width | 28” |
| depth | 10 1/2” |
| weight | 60 lbs. |
Covers essential warnings regarding electrical shock and equipment handling.
Details OSHA regulations on permissible noise exposure levels to prevent hearing loss.
Details the 1/4" jack for connecting your guitar or wireless receiver.
Covers Volume, EQ (Low, Mid, High), and Bright switch for Channel 1.
Covers Gain, Boost, EQ (Low, Mid, High), and Master volume for Channel 2.
Adjusts Reverb amount and Presence for overall tone shaping.
Explains the function of the Power (on/off) and Standby switches.
Details the fuse for protection and the AC Line In socket for power connection.
Describes jacks for connecting footswitches and external effects devices.
Covers the Balanced Out XLR and Speaker Jacks for connecting to other gear.
Recommended settings for achieving a bright and clear tone.
Recommended settings for a warm, overdriven blues tone.
Recommended settings for high-gain distortion and heavy sound.
Recommended settings for a vocal-like, sustained lead tone.
To Next Page
