Need help?Do you have a question about the Crate BT100 and is the answer not in the manual?
Power| output power rating | 100W RMS |
|---|---|
| input power requirements | 120 VAC, 60Hz, 115VA |
Sound Specifications| gain distortion channel | 103dB |
|---|---|
| clean channel | 61dB |
| tone range low | 20dB @ 50Hz |
| lo mid | 24dB @ 150Hz |
| hi mid | 18dB @ 1kHz |
| high | 32dB @ 10kHz |
| signal to noise ratio | 65dB below full power |
Inputs and Outputs| input impedance | 220k ohms |
|---|---|
| maximum input signal level accepted | 15 volts peak-to-peak |
| balanced line out jack | 2 volts peak-to-peak @ full rated power |
Speaker Specifications| internal speaker size | 15” |
|---|---|
| magnet | 56 oz. |
| voice coil | 2.5” |
| rms rating | 150 watts |
| impedance | 4 ohms |
Weight and Dimensions| size | 26-1/2” H x 21-1/2” W x 16-1/2” D |
|---|---|
| weight | 69 lbs |
Essential safety guidelines to prevent hazards like electric shock, fire, and hearing damage during operation.
Clarification of warning symbols used in the manual, including dangerous voltage and reference to instructions.
Provides manufacturer information, production facilities, product type, and compliance with safety and EMC standards.
Explanation of input, -15dB switch, mute, gain, shape, distortion level, and channel switching.
Details on clean channel EQ, level, octave, master volume, limit LED, CD input, and headphones jack.
Describes power switch, electronic tuner, external speaker, footswitch, and effects loop send/return jacks.
Explains balanced line out, pre/post EQ switch, ground lift, and volume control for line output.
Recommended control settings for various music genres like Rock, Jazz, Country, Funk, Solo Fuzz, and Super Fat Fuzz.
Visual representation of the amplifier's internal signal path, including tuner, EQ, effects loop, and power amp stages.
Comprehensive specs including output power, gain, tone range, impedance, speaker details, input power, size, and weight.
To Next Page
