EasyManua.ls Logo

Crate DX-212 - Specifications

Crate DX-212
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications:
AAppppeennddiixx CC
Analog:
Output Power Rating DX-112 60 watts RMS; DX-212 100 watts RMS (50W RMS x 2)
Input Impedance High gain 80k ohm; Low gain 150k ohm
Line Input Impedance 47k ohm
Line Output Impedance 1k ohm
Headphone Impedance 32 ohm minimum
Internal Speaker(s) DX-112 (1) 12” Custom Eminence, 8 ohms; DX-212 (2) 12” Custom Eminence, 8 ohms
Power Requirements 120VAC, 60Hz, 200VA; 100/115VAC, 50/60Hz, 200VA; 230VAC, 50/60Hz, 200VA
Size and Weight DX-112/212 21.4”H x 27.9”W x 10.2”D; DX-112 50 lbs; DX-212 57 lbs
Digital:
Analog to Digital Conversion 20-bit Delta-Sigma w/64X oversampling
Digital to Analog Conversion 20-bit Delta-Sigma w/128X oversampling
Conversion Rate 46.875 kHz
Digital Signal Processor 24-bit operating at >40 million instructions/second
Final Note:
No oversampling was used in our emulation software, and no animals were harmed during its design and development.
46
DX-112/212 Digital Guitar Amplifier

Related product manuals