FlexWave120H Guitar Amplifier w/DSP and Channel Tracking
Introduction
Congratulations!
You are now the proud owner of the Crate FlexWave120H three-channel
guitar amplifier with advanced digital signal processing (DSP) and Channel Tracking. This rug-
ged amplifier combines outstanding features with serious clean and distorted sounds. Digital
Reverb, Delay, and Modulation effects provide you with a wide variety of sounds. Crate’s
unique Channel Tracking feature automatically stores your DSP settings for each channel to
memory. As you switch from one channel to another, the DSP settings for the selected chan-
nel are instantly recalled. The supplied three-button footswitch allows you to select channels
and change the DSP bank (Bank A/Bank B) by “remote control.” A front panel 1/8" stereo
CD input jack allows you to play along with your CD player, MP3 player, or iPod. A rear panel
insert jack allows you to add even more effects by connecting an external effect processor.
Like all Crate products, your FlexWave120H amplifier is designed by musicians and built using
only the best components. Extensive testing confirms that this amplifier is the absolute best it
can be. In order to get the most out of your new amplifier, we strongly urge you to read this
manual before you begin playing.
And thank you for choosing Crate.
Here are some of the features packed into your new FlexWave120H Amplifier:
• 120 watts rms power output
• Three-Channel Operation
—High Gain Channel
—Overdrive Channel
—Clean Channel
• 3-band EQ on the Overdrive and Clean Channels
• Proprietary “Shape” EQ control on the High Gain Channel
• DSP Effects including Delay, Modulation, and Reverb sections
• CD Input
• Effects Loop
• 3-Function Footswitch included
• External Speaker jack
• Built-in Chromatic Tuner
3
To Next Page
Loading...
Need help?
General
