Need help?Do you have a question about the Crate G200CXL and is the answer not in the manual?
Accepts input from a guitar or other audio source via a 1/4" phone jack.
Sets the gain of the SCG Channel to adjust the amount of overdrive.
Selects SCG Channel tone: 'Out' for mid-emphasis, 'In' for highs/lows emphasis.
Sets the overall signal level for the SCG Channel.
Selects between high-gain SCG channel (overdriven) and low-gain normal channel (clean).
Connects to a footswitch for channel selection or reverb control.
Sets the overall level of the normal channel; must not be zero for SCG Channel to function.
Affects upper harmonic range; clockwise increases crispness or 'bite'.
Sets midrange tone; low settings thin sound, high settings give 'fatter' sound.
Increases or decreases 'bottom' or 'warmth' of the sound.
Alters apparent acoustical qualities, from 'dry' to 'concert hall' sound.
Engages the preset stereo chorus effect when pushed to the 'In' position.
Unbalanced outputs to link to other amplifiers or a tape recorder.
Allows private listening by disconnecting speakers when headphones are plugged in.
Indicates when the amplifier is powered on.
Turns the unit on (right side) and off (left side).
Details about the grounded power cord and speaker jacks for external connections.
To Next Page
General
