Need help?Do you have a question about the Crate PRO AUDIO PX700DLX and is the answer not in the manual?
Voltage Gain| maximum voltage gain to power amp out | 86 dB |
|---|---|
| voltage gain to main out, monitor out (PAD OFF) | 66 dB |
| voltage gain to effect out | 72 dB |
Frequency Response| frequency response at power amp out | +1/-3 dB, 20 Hz - 20 kHz @ 1 W output into 8 Ω |
|---|---|
| frequency response at main out, monitor out, effects send | +1/-3 dB, 20 Hz - 20 kHz @ +4 dB output into 10 kΩ |
Power and Consumption| maximum output power | 200 W/4 Ω @ 0.5% THD @ 1 kHz |
|---|---|
| power consumption | 200 W |
| phantom power | +48 V |
Size and Weight| width | 18.9” (480 mm) |
|---|---|
| height | 10.8” (275 mm) |
| depth | 10.8” (275 mm) |
| weight | 37.5 lbs (17 kg) |
Voltage Gain| maximum voltage gain to power amp out | 86 dB |
|---|---|
| voltage gain to main out, monitor out (PAD OFF) | 66 dB |
| voltage gain to effect out | 72 dB |
Frequency Response| frequency response at power amp out | +1/-3 dB, 20 Hz - 20 kHz @ 1 W output into 8 Ω |
|---|---|
| frequency response at main out, monitor out, effects send | +1/-3 dB, 20 Hz - 20 kHz @ +4 dB output into 10 kΩ |
Power and Consumption| maximum output power | 200 W/4 Ω @ 0.5% THD @ 1 kHz |
|---|---|
| power consumption | 200 W |
| phantom power | +48 V |
Size and Weight| width | 21.6” (546 mm) |
|---|---|
| height | 10.8” (275 mm) |
| depth | 10.8” (275 mm) |
| weight | 39 lbs (17.7 kg) |
Contains essential safety instructions regarding electrical shock and proper handling of the equipment.
Details U.S. Government OSHA regulations for permissible noise exposure and potential hearing loss.
Details features of mono input channels, including EQ, level controls, gain, pad, and input jacks.
Outlines features of the master section, including graphic EQs, limiter, effects, DSP, and various output jacks.
Details the primary controls for each mono channel, including EQ, sends, level, gain, and pad.
Explains the different input connections and the Peak/Signal LED for monitoring.
Details the controls for stereo input channels, including EQ, sends, level, gain, and peak/signal indicator.
Explains the stereo line inputs and mono mic input connections for channels 5-7/5-9.
Covers 7-band graphic EQs, LED meters, limiter indicators, and the selector for main/monitor or main 1/main 2 assignment.
Details controls for effects processing, auxiliary inputs, and tape inputs for signal management.
Explains the power status indicator and the +48V phantom power function for microphones.
Explains DSP effect selection, activation, external effects send, and footswitch operation for remote control.
Details various input and output jacks for connecting external devices, monitoring, and main outputs.
Explains power amp operation modes and speaker connection jacks, including load ratings.
Describes the AC power connection and the main power switch for operating the mixer.
Lists maximum voltage gain values for different signal paths and input channel equalization ranges.
Details frequency response characteristics and maximum output power ratings under specific load conditions.
Provides specifications for harmonic distortion, noise levels, and signal crosstalk at various frequencies.
Lists details on graphic EQ bands, DSP effects types, phantom power voltage, limiter, footswitch, power draw, and physical dimensions.
To Next Page
