Crate CMX62 - User Manual

In order to achieve maximum performance from
your new Crate Audio Mixer we recommend that
you read this user’s guide prior to its use.
User’s Guide
for the
CRATE AUDIO
CMX62
Stereo Console Mixer

Crate CMX62 Specifications

System Inputs

mono mic/line input channels	6
stereo line input channels	2
stereo aux return	1

Channel Specifications

Low-Z Mic load impedance	1k ohm
High-Z Line load impedance	10k ohm
High-Z Line 2 load impedance	22k ohm

Noise and Distortion

Equivalent input noise	< -129dB
Common mode rejection	-90dB min., -70dB @ 50Hz
Total harmonic distortion	< 0.1% @ 1kHz

Power Requirements

power supply voltage	16.8VAC x 2
power supply current	1A
phantom power	+48VDC

Size and Weight

height	2.75 inches
width	11.625 inches
depth	13 inches
weight	11 lbs

Summary

Introduction

Features

About This Manual

The Mono Input Channels

The Stereo Input Channels

The Master Section

The Rear Panel

Applications

Basic Mono Operation

Shows mixer use with a stereo power amplifier for house speakers and stage monitors.

Home Studio

Connects mixer outputs to a computer for recording and studio monitors.

DJ Setup

Connects mixer to a stereo power amplifier driving house speakers for DJ use.

House of Worship

Uses mixer Main Outs for sanctuary, Aux Outs for platform, and Mono Out for childcare.

Separating Vocals and Instruments

Routes vocals to right channel, instruments to left for separate speaker outputs.

External Effects and Recorders

Details using insert jacks, Aux/Effects loops, and connecting tape decks.

Equalization Diagrams

Differences in Cable Types

System Block Diagram

Gain Level Diagram

Technical Specifications