EasyManua.ls Logo

Crate&Barrel Cane User Manual

Default Icon
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1/12
800.967.6696 | crateandbarrel.com
v.04 - 07/2018
Cane Crib / Lit d’enfant / Cuna
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib
if any parts are missing, damaged or broken. Contact Crate and Barrel for replacement parts and instructional literature if
needed. DO NOT substitute parts.
If refinishing, use a non-toxic finish specified for children’s products.
Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
Infants can suffocate in gaps between crib sides and a mattress that is too small.
To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a soft
cloth, and dry thoroughly.
Follow warnings on all products in a crib.
When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
CAUTION: ANY MATTRESS USED IN
THIS CRIB SHALL BE AT LEAST 27 1⁄4 BY 51
5⁄8 IN. (69 CM BY 131 CM) WITH A
THICKNESS NOT EXCEEDING 6 IN. (15 CM),
AND WHEN IT IS PUSHED FIRMLY AGAINST
ANY SIDE OF THIS CRIB, IT DOES NOT
LEAVE A GAP OF MORE THAN 1 IN. (3 CM)
BETWEEN THE MATTRESS AND ANY PART
OF ANY OTHER SIDE OF THE CRIB.
!
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. Keep instructions for future use.
Do not use this crib if you cannot exactly follow the instructions that come with it.
WARNING:
!
WARNING:
!
For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be greater
than 50 lb (22.7 kg).
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding or mattress
under an infant.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
STRANGULATION HAZARD:
Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck, such as hood
strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any reason.
To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
DO NOT place crib or toddler bed near window or patio door where cords from blinds or drapes may strangle a child.
FALL HAZARD:
When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (89 cm), the crib shall no longer be used and the child
should be placed in a youth or regular bed.
Question and Answer IconNeed help?

Do you have a question about the Crate&Barrel Cane and is the answer not in the manual?

Crate&Barrel Cane Specifications

General IconGeneral
BrandCrate&Barrel
ModelCane
CategoryBaby & Toddler Furniture
LanguageEnglish

Summary

Safety and Precautions

General Warnings and Hazards

Critical safety warnings regarding assembly, age, weight, suffocation, strangulation, and falls.

Mattress Fit Requirements

Specific dimensions and gap limitations for crib mattresses to ensure safety.

Product Safety Information

Choking Hazard - Small Parts

Warning about small parts in the unassembled state, requiring adult assembly.

Product Components

Hardware Identification

Lists and identifies all hardware components required for assembly.

Product Components

Furniture Panels Identification

Identifies the main furniture panels included in the crib assembly.

Assembly Instructions

Step 1: Initial Panel Attachment

Attaches side panels to end panels using bolts, washers, and brackets.

Assembly Instructions

Step 2: Second Panel Attachment

Attaches the remaining side panels to the end panels using hardware.

Assembly Instructions

Step 3: Positioning and Corner Supports

Positions crib upright and installs corner supports for mattress height.

Assembly Instructions

Step 4: Mattress Support Panel Installation

Attaches the mattress support panel to the installed corner supports.

Assembly Instructions

Step 5: Final Assembly and Tightening

Secures mattress panel with bolt caps and tightens all bolts.

Product Care and Maintenance

Cleaning and Care

Instructions for cleaning the crib surfaces with mild solutions and soft cloths.

Maintenance and Storage

Guidance on periodic checks, hardware tightening, and long-term storage.

Related product manuals