Crate&Barrel Taylor Toddler Rail User Manual

Taylor
• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib
if any parts are missing, damaged or broken. Contact Crate and Barrel for replacement parts and instructional literature if
needed. DO NOT substitute parts.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a soft
cloth, and dry thoroughly.
• Follow warnings on all products in a crib.
• When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
CAUTION: ANY MATTRESS USED IN
THIS CRIB SHALL BE AT LEAST 27 1⁄4 BY 51
5⁄8 IN. (69 CM BY 131 CM) WITH A
THICKNESS NOT EXCEEDING 6 IN. (15 CM),
AND WHEN IT IS PUSHED FIRMLY AGAINST
ANY SIDE OF THIS CRIB, IT DOES NOT
LEAVE A GAP OF MORE THAN 1 IN. (3 CM)
BETWEEN THE MATTRESS AND ANY PART
OF ANY OTHER SIDE OF THE CRIB.
!
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling crib. Keep instructions for future use.
• Do not use this crib if you cannot exactly follow the instructions that come with it.
WARNING:
!
WARNING:
!
• For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be greater
than 50 lb (22.7 kg).
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding or mattress
under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
STRANGULATION HAZARD:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck, such as hood
strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib or toddler bed near window or patio door where cords from blinds or drapes may strangle a child.
FALL HAZARD:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (89 cm), the crib shall no longer be used and the child
should be placed in a youth or regular bed.
Toddler Rail
Garde-corps pour lit d’enfant / Barandilla para niño pequeño
1/15800.967.6696 | crateandbarrel.comv.04 - 07/2018

Crate&Barrel Taylor Toddler Rail Specifications

General

Brand	Crate&Barrel
Model	Taylor Toddler Rail
Category	Baby & Toddler Furniture
Language	English

Summary

Product Safety Information

General Assembly and Usage Warnings

Failure to follow instructions can result in serious injury or death. Read all instructions.

Child Safety: Age, Weight, and Bedding

Observe age/weight limits. Avoid soft bedding to prevent suffocation and SIDS.

Strangulation and Fall Hazard Prevention

Secure loose fasteners, avoid cords, and position mattress to prevent falls.

Mattress Fit and Gap Requirements

Use a mattress of specific dimensions to prevent entrapment hazards.

Product Inspection and Care Precautions

Inspect for damage, use non-toxic finishes, and avoid plastic covers.

Product Components and Hardware

Box Contents Overview

Lists hardware and individual components included in the box for assembly.

Hardware Identification

Details and quantities of bolts, washers, brackets, and caps used in assembly.

Tools and Main Component

Identifies Allen wrenches and the toddler rail itself.

Assembly Instructions

Step 1: Mattress Panel Removal

Remove mattress panel, bolt caps, and support pins from crib assembly.

Step 2: Side Panel Hardware Detachment

Unfasten bolts, washers, and brackets from the side panel and crossbar.

Step 3: Isolate Side Panel

Remove the side panel from the main assembly and set it aside.

Step 4: Connect Rail to End Panels

Loosely attach toddler rail dowels to end panels using bolts and brackets.

Step 5: Secure Rail to End Rails

Loosely attach toddler rail to each end rail using bolts and washers.

Step 6: Set Mattress Support Height

Determine lowest height and re-insert support pins securely into corners.

Step 7: Install Mattress Panel and Caps

Fit mattress panel into support pins and attach bolt caps with a large Allen wrench.

Step 8: Final Tightening and Storage

Insert end panel bolts, tighten all hardware, and store unused components.

Care, Maintenance, and Storage

Cleaning and General Care

Clean surfaces with a soft cloth. Avoid abrasive cleaners. Periodically check bolts.

Product Maintenance and Inspection

Securely tighten fasteners, inspect for damage, and do not substitute parts.

Storage Guidelines

Store instructions in envelope. Store crib in a cool, dry place away from moisture.