Crate&Barrel Hampshire Toddler Rail User Manual

Hampshire
• Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges
before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. DO NOT use crib
if any parts are missing, damaged or broken. Contact Crate and Barrel for replacement parts and instructional literature if
needed. DO NOT substitute parts.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides and a mattress that is too small.
• To clean crib: Wipe with clean soft cloth dampened with a mild cleanser and water. Rinse with clean water using a soft
cloth, and dry thoroughly.
• Follow warnings on all products in a crib.
• When a vaporizer is in use, always aim vapor steam away from the crib as well as away from other wood furniture.
CAUTION: ANY MATTRESS USED IN
THIS CRIB SHALL BE AT LEAST 27 1⁄4 BY 51
5⁄8 IN. (69 CM BY 131 CM) WITH A
THICKNESS NOT EXCEEDING 6 IN. (15 CM),
AND WHEN IT IS PUSHED FIRMLY AGAINST
ANY SIDE OF THIS CRIB, IT DOES NOT
LEAVE A GAP OF MORE THAN 1 IN. (3 CM)
BETWEEN THE MATTRESS AND ANY PART
OF ANY OTHER SIDE OF THE CRIB.
!
• Failure to follow these warnings and assembly instructions could result in serious injury or death.
• Read all instructions before assembling crib. Keep instructions for future use.
• Do not use this crib if you cannot exactly follow the instructions that come with it.
WARNING:
!
WARNING:
!
• For toddler bed use, the minimum age shall be no less than 15 months, and the maximum weight shall not be greater
than 50 lb (22.7 kg).
• Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding or mattress
under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
STRANGULATION HAZARD:
• Strings can cause strangulation! DO NOT place items with a string, cord or ribbon around a child’s neck, such as hood
strings or pacifier cords. DO NOT suspend strings over crib or toddler bed, or attach strings to toys for any reason.
• To help prevent strangulation, tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• DO NOT place crib or toddler bed near window or patio door where cords from blinds or drapes may strangle a child.
FALL HAZARD:
• When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large toys
and other objects that could serve as steps for climbing out.
• When child is able to climb out or reaches the height of 35 inches (89 cm), the crib shall no longer be used and the child
should be placed in a youth or regular bed.
Toddler Rail
Garde-corps pour lit d’enfant / Barandilla para niño pequeño
1/17800.967.6696 | crateandbarrel.comv.04 - 07/2018

Crate&Barrel Hampshire Toddler Rail Specifications

General

Product Type	Toddler Rail
Brand	Crate&Barrel
Collection	Hampshire
Finish	White
Material	Wood
Compatibility	Hampshire Crib

Summary

Safety Warnings and Precautions

General Warnings and Risks

General safety warnings, minimum age, maximum weight limits, suffocation, SIDS, and strangulation hazards.

Fall Hazards and Mattress Fit

Precautions against falls when a child can stand or climb, and specific mattress size requirements.

Product Inspection and Care

Guidelines for checking hardware, refinishing, cleaning, and general product care.

Choking Hazard - Small Parts

Small Parts Warning

Warning about small parts present in the unassembled state, requiring adult assembly.

Parts and Tools Identification

Hardware Components List

Lists and identifies all hardware components included in the package.

Required Assembly Tools

Lists the necessary tools, such as Allen wrenches, for assembly.

Assembly Instructions

Step 1: Remove Mattress Support Panel

Instructions for removing the mattress support panel and unfastening caps.

Step 2: Remove Corner Supports

Instructions to remove each corner support from the crib assembly.

Step 3: Release Side Panel and Unfasten Hardware

Detaching a side panel and unfastening bolts and brackets from top/bottom assemblies.

Step 4: Disassemble Side Panel

Carefully disassembling a side panel of the crib assembly and setting it aside.

Step 5: Attach Brackets to End Panels

Removing brackets and bolts from end panels and securing new bolts.

Step 6: Attach Bracket to Left End Panel

Removing a pre-attached bolt from the left end panel and attaching a new bracket.

Step 7: Fit Toddler Rail to End Panels

Fitting pre-assembled wood dowels of the toddler rail into end panel holes.

Step 8: Secure Toddler Rail and End Panels

Securing the toddler rail and end panels with bolts, washers, and brackets.

Step 9: Fit Corner Supports for Mattress

Locating the lowest hole setting and fitting corner supports for the mattress.

Step 10: Insert Mattress Panel and Complete Assembly

Inserting the mattress panel, attaching bolt caps, and finishing the assembly.

Cleaning, Maintenance, and Storage

Cleaning and Care Instructions

Guidelines for cleaning surfaces with soft cloths and avoiding abrasive cleaners.

Maintenance and Safety Checks

Periodically checking and tightening all hardware for secure assembly.

Storage Recommendations

Advice on storing instructions and the crib in a cool, dry place.