3
Contact CRC Industries at 800-556-5074 | smartwasher.com
1. Care must be taken as burns can occur from touching
hot parts.
2. Do not operate SmartWasher
®
with a damaged cord or
if the equipment has been dropped or damaged until it
has been examined by a qualied service person.
3. Do not let a cord hang over the edge of the table,
bench, or counter or come in contact with hot
manifolds or moving fan blades.
4. If an extension cord is necessary, a cord with a current
rating equal to or more than that of the equipment
should be used. Cords rated for current lower than the
equipment may over heat. Care should be taken to
arrange the cord so that it will not be tripped over or
pulled. (Must be rated a minimum of 15A/110V)
5. Unplug equipment from electrical outlet when not in
use for an extended period of time. Never use the cord
to pull the plug from the outlet. Grasp plug and pull to
disconnect.
6. To reduce the risk of re, do not operate equipment
in the vicinity of open containers of ammable liquids
(gasoline).
7. Adequate ventilation should be provided when working
on operating internal combustion engines.
8. Keep hair, loose clothing, ngers, and all parts of body
away from moving parts.
9. To reduce the risk of electric shock, do not use on wet
surfaces or expose to rain.
10. Use SmartWasher
®
only as described in this manual.
Use only attachments and parts recommended by CRC
Industries.
11. ALWAYS WEAR SAFETY GLASSES. Everyday
eyeglasses only have impact resistant lenses, they are
not safety glasses.
12. It is good practice to wear gloves whenever using
industrial cleaning uids.
Safety Instructions
Please read this instruction manual carefully and completely to ensure
that your new SmartWasher
®
will operate at its maximum effectiveness.
When using your SmartWasher
®
, basic safety precautions should always be
followed, including:
To Next Page
Loading...
Need help?
General
