Creality 3D CR20 Series User Manual

CR20 Series 3D Printer
◆ This guidebook is for standard CR-20.
◆ Select the correct input voltage to match your local mains
(220V or 110V)
◆ Because of software/hardware upgrades and model
differences, new revisions may not be listed in this guide.
◆ Detailed instructions for use are available on the SD card.
V.1.0
To be the Chief Evangelist
To make Top-quality 3D printer

Creality 3D CR20 Series Specifications

General

Brand	Creality 3D
Model	CR20 Series
Category	3D Printers
Language	English

Summary

CR20 Series 3D Printer Guidebook

Safety Precautions

Preface and Introduction

Introduction to the CR20 Printer

General Component Overview

Device Installation Guide

Gantry Frame Installation

Steps for correctly attaching the gantry frame to the printer base.

Spool Holder Mounting

Instructions for securely mounting the filament spool holder.

Cable Connection Instructions

LCD Screen Interface and Operation

Screen Menu Navigation

Guide to accessing and navigating through the printer's screen menu options.

Filament Loading Procedure

Preheating and Filament Feeding

Steps for preheating the nozzle and feeding filament into the extruder.

Filament Replacement Tips

Practical advice for replacing filament during printing operations.

Bed Leveling Guide

Initial Leveling Setup

Performing auto-home and disabling steppers for bed leveling.

Nozzle-to-Bed Gap Adjustment

Adjusting the platform height with leveling screws for proper gap.

Software Installation and Setup

Cura Slicing Software Setup

Detailed guide for installing and configuring the Cura slicing software.

First Print Guide

Model Slicing and File Transfer

Process of slicing a 3D model and transferring it to the printer.

Starting the First Print

Steps to initiate the printing process from the SD card.

Troubleshooting and Maintenance

Maintenance and Troubleshooting Flow

Flowchart for diagnosing and resolving common printer issues.

Circuit Wiring Diagram

After-Sales Service and Warranty

Warranty Terms and Conditions

Information on warranty coverage, duration, and service policies.

Service Request Form

Details required for submitting a service or warranty request.