Creality 3D Ender-3 Pro Series - User Manual

V.2.2
Ender-3 Pro Series 3D Printer
[ To make Top-quality 3D printer]
To be the Chief Evangelist
◆ This guide is for the Ender-3 Pro Series of 3D printers.
◆ Select the correct input voltage to match your local mains
(230V or 115V)
◆ Because of software/hardware upgrades and model
differences, new revisions may not be listed in this guide.
◆ Please plug the power cord into a three−hole power jack.
◆ Detailed instructions for use are available in the TF card.
Guide Book

Summary

Important Safety Notes

Preface and User Guidance

Printer Components Introduction

Screen Information Displayed

Loading Filament Procedure

Bed Levelling Guide

Software Installation Guide

First Printing Process

Trouble Shooting Guide

After-Sales Service and Warranty

Creality 3D Ender-3 Pro Series Specifications

General

Print Technology	FDM (Fused Deposition Modeling)
Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1-0.4 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Print Speed	180 mm/s
Max Nozzle Temperature	255°C
Max Bed Temperature	110°C
Connectivity	SD Card, USB
Machine Dimensions	440 x 410 x 465 mm
Bed Leveling	Manual
Frame Material	Aluminum
Supported Filaments	PLA, ABS, PETG, TPU
Input Voltage	110V / 220V
Display	LCD
Power Supply	MeanWell Power Supply