② Folder Path: Display the file folder of the model to be saved. Change as needed.
③ Project Settings
④ Import an external model: Import a 3D model in .PLY, .OBJ or .STL formats into Creality Scan to
continue scanning and capture more details.
Icon : Select file.
⑤ Icon : Start a new scan.
Preview
After specifying the Object, Size, Feature, Accuracy, and Color Mapping options, press to enter
the scanning page. The left area of the 3D Model Preview window shows the distance. Place the scanner at
an "Optimal distance" from the object and try to maintain it during scanning.
When click the on the Project Setting UI, the scan UI is shown to users.
① RGB Camera: Display the image captured by the RGB Texture camera.
Icon : This option aids in positioning the object to be scanned so that the cameras can
see it.
Icon : Brightness can be manually adjusted for best results.
② IR Camera: Display the IR image captured with the current exposure setting.
Icon : Brightness can be manually adjusted for best results (the areas not displayed in red or blue).
Although the software can automatically adjust to find the appropriate setting, remember to adjust
manually to prevent exposure variations that may interfere with data capture.
③ Scanning distance: Place the scanner's distance to the object so that it is in the Perfect zone to ensure
scanning accuracy. Adjust the optimal distance according to the prompt.
④ 3D Model Preview Window: Display the 3D model data that will be captured when scanning starts or all
of the data that has been captured after scanning has started. The view of the model may be dragged or
zoomed in the 3D Model preview area by the mouse (Left Mouse Button: Rotate the model; Wheel: Zoom
in/out).
To Next Page
Loading...
