18
Be certain each post is secure.
Next, carefully turn box over so that DOOR is facing down.
Be sure that door does not slide off posts.
Right Side Box Shown.
Build on a blanket for best results
7
Insert
(9) Posts HEAD DOWN into
post holes on the edges of RB1 & RB2.
To secure door, insert (9) Locking Cams
along
both sides of the interior of the box and
turn with a Phillips Screwdriver until locked
in place. (About 220 degrees).
8
Carefully set Door over 9 posts
making sure posts align with post
holes in Door.
DO NOT force Door onto posts.
RB1
RB1
Posts (9)
To Next Page
Loading...
