19
6
8
Next, you will install the Right Box Divider.
Right Box
Side 1
Right Box
Side 1
Slide divider in and align with pilot
holes on lid and base.
Install (2) angle brackets at correspond-
ing pilot holes in base and sides using (8)
14mm washer screws.
Right Box
Left Box
Side 1
Left Box
Side 1
Left Box
3
To secure door. insert (9) cams
both sides of the interior of the box and
turn with an Allen Wrench until locked in
place.
x9
Locking
Cams
4
Insert (24) shelf pegs into holes in Side 2
using the Shelf Peg Tool. We recommend
placing pegs as shown. *Be sure pegs are
secure in their holes
x24
Shelf
Pegs
Fit shelf peg tool
over shelf peg
Press peg firmly until
in snaps into place
Pull shelf peg tool
down and off
secured shelf peg at
an angle.
RB2
9
11
RB2
7
Use a Phillips screw driver to MANUALLY
install divider using (4) #3: 1 1/2” Confirmat
Screws into pilot holes to secure divider.
Divider MUST be installed manually to
avoid damaging your DreamBox.
10
Slide CB dividers (2) in one at a time
& secure to
CB Lid
&
CB Shelf 2
(4) #3 1 1/2 Confirmat Screws
in each divider.
Use ONLY a MANUAL phillips
screw driver.
Install (2) angle brackets
using (8) #5 14mm washer
screws.
11
#3 Screws (4)
To Next Page
Loading...
