Create Room Sew Station - Install Power Lifter to Sew Station

19
Install power lifter. Be careful to not over tighten.
Sewing Side Table
x8
Mounting Screws
x2
Lift Screws
Lift Screws
Mounting
Screws
Mounting
Screws
Sewing
Top
Sewing
Back Table
Sewing Side Table
Side 1
Lift Screws
Mounting
Screws
Mounting
Screws
RIGHT SIDE DREAMBOX ATTACHMENT
Note: Place in left most pilot holes. Unused pilot holes
should be on the right side of power lifter.
x8
Mounting Screws
x2
Lift Screws
LEFT SIDE DREAMBOX ATTACHMENT
Note: Place in right most pilot holes. Unused pilot holes
should be on the left side of power lifter.
14
Sewing
Back Table
Sewing Top
Side 2