Create Room Sew Station - Connect Remote and Transformer

20
Right Spool Holder: Place remote on left side. Use pilot holes to attach
Left Spool Holder: Place remote on right side. Use pilot holes to attach
Sewing Top
Sewing Back
Table
Side 1
Side 2
Sewing Side Table
Remote
a
Plug in cords to Remote. Apply Velcro to Transformer
and to the underside of the table shown below. Press
the velcro on the transformer and the table firmly
together.
15
Cord
Holder
Transformer
Remote
Transformer
Power Cord
Cord that is plugged
into Motor
Cord Holder