EasyManua.ls Logo

Create Studio Pro - Before First Use

Create Studio Pro
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
ENGLISH
BEFORE FIRST USE
The user is ultimately responsible for their own safety. Children
or persons with physical disabilities, low perceptual abilities or
mental disabilities should not use this product unless they are
supervised or have prior knowledge of its use.
Close the lid properly and do not touch it while the frother is in
use, to avoid burns if it spills due to misuse.
This appliance comes with a separate power base. It will au-
tomatically turn off as soon as the appliance is removed from
the base.
The appliance should only be used with the supplied power
base.
This appliance is not intended to be used with an external timer
or separate remote control system.
Accessible surfaces can reach high temperatures during appli-
ance operation. Always hold the appliance by the handle when
in use and until it has cooled down.
Do not turn on the frother without rst adding milk or it could
cause overheating or dry burning of the product. It is consid-
ered dry burning when the temperature is higher than 180 °C.
The dry-burn protection will activate after a continuous beep
and the skimmer will stop. If you want to restart it, wait for it to
cool down before using it again.
After power on, if all the indicator lights come on for one sec-
ond and there is no response, the power base may not be mak-
ing good contact. You can rotate the frother to check if it has
properly connected with the base.
Open the packaging, save all the necessary information in it, take out the milk
frother and connect it to the power supply to check if it works properly.
Please read the instructions carefully to check whether the accessories are
complete.
Clean the skimmer accessories before using it for the rst time in accordance
with the cleaning and maintenance regulations.

Related product manuals