Create Thera Classic Compact - Milk Frother Function; Hot Water Function; Tank Cleaning

10
ENGLISH
MILK FROTHER FUNCTION
HOT WATER FUNCTION
TANK CLEANING
1. Press the power button and then the steam button .
At this time, the indicator light will start ashing. When the
steam indicator light stays completely on, preheating is com-
plete.
2. Pour whole milk into a cup, insert the steam nozzle into the sur-
face of the milk, then slowly unscrew the steam regulator until
steam begins to come out.
Note: The steam size can be adjusted according to personal skill.
Release some water into the steam wand before frothing.
3. When the milk temperature reaches about 70ºC and the milk foam starts to puff up, you
can turn the steam regulator to OFF and press the steam button to turn it off.
1. Press the power button and then the steam button . At this time, the indicator
light will start ashing. When the steam indicator light stays completely on, preheating is
complete.
2. Turn the steam regulator to
and the steam pipe will start to discharge hot steam
continuously. This way you can heat water in a cup.
3. Turn the steam regulator OFF to stop the steam output.
• In order for your coffee machine to work efciently, the internal pipes to be clean and the
taste of the coffee to be optimal, it is necessary to descale, clean and maintain the coffee
machine periodically.
• The descaling warning will be displayed when the appliance has run cumulatively for 300
cycles. At this time, all indicators will ash and beep for 5 times, which means that the
coffee maker needs to be descaled, and then the appliance will return to its normal state.
• The descaling warning will be displayed every time you turn on the appliance if you do not
cancel it.
1. Fill the water tank with water and softener to the MAX level (follow the water and softener
scale detailed in the softener instructions).
If you wish, you can use a household descaler; use citric acid instead of the descaler (one
hundred parts water and three parts citric acid).
2. Press the espresso button once to prepare the coffee and prepare about 100 ml of hot
water. Then turn off the appliance and leave the descaling solution in the appliance for 5
minutes.
3. Turn on the device and repeat the previous step 3 times.
4. Then repeat the previous step 2 times with only water at the MAX level (it is not necessary
to wait 5 minutes).
NOTE: Once descaling is completed, it is necessary to cancel the descaling notice. Simulta-
neously press and hold the espresso button , cold coffee button and the steam but-
ton for 3 seconds.