9
ENGLISH
ADVICE:
• Whenever you make hot coffee rst and then cold coffee, place a large cup under the
hot water spout.
• Turn on the steam selector, hot water and steam will come out of the machine.
• When the hot water from the steam nozzle forms a straight line, turn off the steam selector.
• Put cold water in the water tank and your machine is ready to brew cold brew coffee.
1. Place the lter you want to use in the lter holder arm, then put the
ground coffee powder in the lter (the coffee powder should be No. 1,
neither too coarse nor too ne).
2. Then, with the at part of the tamper spoon, press the coffee from the
lter and clean the coffee powder from the edge of the lter with a
brush or a dry cloth.
BREW ESPRESSO
3. Insert the lter holder arm into the coffee maker and
close it rmly until you reach the locking point. .
4. Then place the coffee cup on the cup rest tray, press
the power button and all the indicator lights will
remain on.
5. Prepare hot coffee.
• Press the espresso button and the indicator light will ash. The machine will start
the heating system.
• When the indicator light stays on, the internal components have warmed up and are
ready to brew coffee.
• Press the espresso button again so that the coffee starts to come out. When you
reach the desired coffee volume, press the espresso button again to stop the coffee
maker. (The longest coffee is 60 seconds).
• Press the power button and the coffee maker will remain in standby mode.
6. Prepare cold coffee.
• Press the cold brew button once for the coffee to start coming out.
• When you reach the desired volume, press the cold brew button again and the cof-
fee will stop (the maximum coffee duration is 60 seconds).
• It is recommended to use cold water to obtain a better avor.
To Next Page
Loading...
