Creative XP TRAIL CAM PRO 3 - Function Keys & Other Details

Page 15
Creative XP 3G Scouting Trail Camera PRO3
Views and Details > Function Keys
2.4
Power
Switch
1. Switch ON to enable the camera to work (Note: indicator light
ashes 5 times before camera starts to work on PIR (Auto
Motion Detection Mode)
2. Switch ON, then press “OK” once to wake up camera LCD
screen to enter Setup Mode;
3. Press and hold “OK” for 3 sec to get back to Auto Motion
Detection Mode
4. Switch OFF - Camera stops working.
Camera
Photo
Switch
Switch UP to Pic icon - Photo mode, or PIC + Video mode
Switch Down to Video icon - Video Recording mode
IR LEDs
Group Switch
Switch up: 25 - ONLY upside 25 pcs IR LEDs work
Switch down: 56 - ALL 56 pcs IR LEDs work
MOBILE
NETWORK
Switch
Switch up: On - GPRS function enabled. (wait 30sec to 2 min to nd
a signal)
Switch down: Off - GPRS function disabled.
Note: When you want to congure the camera settings, we
suggest disabling GPRS function to quickly wake up LCD
screen without waiting for the signal.
2b. Switches Functions