Creative XP TRAIL CAM PRO 3 - Auto Power Off Feature

Page 25
Creative XP 3G Scouting Trail Camera PRO3
Operation Menu
4.5
4.4 Auto Power Off
In Setup Mode, the camera will automatically enter Auto Motion
Detection mode if no keypad is touched within 60 sec. Please manually
turn it on, as if you want to do some further conguration.
Note: Camera stays in “Setup” mode if the camera is in any of the
Menu conguration pages and it will not enter automatically Auto Motion
Detection mode.
4.5 Operation Menu
1. Setup Mode, Press “Menu” once to enter camera setting menu;
2. Navigate setting interface by pressing “←”, “↑”, “→”, or “↓”;
3. Press “OK” for selection, “Menu” to exit (go back) to the previous
page, and “Menu” to switch alpha/ digits/ symbols.
Note: For some settings, the user needs to press “OK” to save & press “M”
to exit the conguration after pressing “OK” to conrm (Cam ID, Delay, Time
Lapse, Timer, Password).
[CAM] - CAMERA MENU