Page 39
Creative XP 3G Scouting Trail Camera PRO3
Troubleshooting
6
4. When GPRS / 3G function is on, there will be around 1-2 minutes interval for the
camera to send out photo before the camera will shoot the next photo. If you turn
off the GPRS / 3G, the camera will shoot photos continuously.
5. Please format the SD card with the camera before using or when the camera stops
taking images.
6.3 Night Vision Flash Range Doesn’t Meet Expectation
1. Only 4pcs AA batteries are not able to support camera night vision ability - please
install 8 pcs AA batteries.
2. Please check to make sure that batteries are fully charged or enough power is left.
3. “Max Range” offers better IR ash range. Given IR ash range values are based on
Max Range setting, please adjust Night Mode to Max Range for the better night
vision ash range.
4. High-quality 1.5V NiMH rechargeable AA batteries can also offer much better
IR ash range; alkaline batteries cannot deliver enough amperage to power the
illuminator consistently at night;
5. To ensure accuracy and quality of the nighttime image, please mount the camera
to dark environments without any obvious light sources;
6. Stable surroundings (like trees, walls, ground, etc.) within ash range can get you
better night time images; please do not aim camera to total open eld where
there is nothing within IR ash range to reect the ash back; it’s like shining a
ashlight into the sky at night - you just can’t see anything - same goes for the
trail camera.
To Next Page
Loading...
