Page 32
Creative XP 3G Scouting Trail Camera PRO3
Operation Menu > 3G > SEND & PIN
4.5
Send To
SIM PIN
Phone: Enter recipients’ phone numbers (1 or 2) – you don’t need the
+1 or the 001 prex – example: 6312688067
Email: Enter recipients’ email accounts (1 or 2) & email passwords
You can skip the description below if your SIM has been
activated already. We recommend activating it before using in
the trail camera.
The message “Pls input PIN-Code” will not pop up after signal
search if your SIM is activated.
1. The camera will check if inserted SIM card is activated during a
signal search in “Test” mode – 30 sec to 2 min;
2. If SIM is not activated, “Pls input PIN-Code” will pop up on screen
after signal search;
3. Then “SIM PIN” will turn to be congurable in “3G” page of Menu;
4. Enter the PIN code in “SIM PIN” and save to exit; when you restart
the camera after you enter the PIN code, the camera will activate
SIM card automatically during the signal search.
NOTES:
• “Pls input PIN-Code” will pop up again if a wrong PIN code is
entered.
• Please enter your PIN code again if you see the message “Pls input
PIN-Code” after a signal search.
• SIM is limited to be activated 3 times; it will lock if the PIN codes
entered are all wrong during these 3 times trial. We suggest you
double check your PIN code before you try again.
• Please insert SIM card into your phone to unlock it by using its PUK
code after 3 times trial of activation based on steps above.