Creative SOUND BLASTER ROAR 2 - TeraBass Usage and Voice Prompts

THE SOUND BLASTER ROAR 2 PRODUCT GUIDE 17
Voice Prompts
The Sound Blaster Roar 2 features an intuitive
voice prompt system that helps you set up a
Bluetooth  connection with your device. Once
you’re familiar enough with the speaker, you
have the option to disable the voice prompts.
To disable voice prompts:
When the speaker is powered on, press
and
– together.
To enable voice prompts:
When the speaker is powered on, press
and
+ together.
Here’showyoudoit!
/ TeraBass
When do I use TeraBass?
TeraBass is best used when:
•TheSoundBlasterRoar2islistenedtoatlow
to medium volume levels – for example
with near-field use.
• The Sound Blaster Roar 2 is placed in an
environment where there is an absence of
boundary walls for bass reinforcement – for
example when you’re outdoors.
• The Sound Blaster Roar 2 is placed on very
dense material like marble or granite or in mid
to far-field listening conditions – for example in
a dance hall or at indoor gatherings.
Do not use TeraBass when:
• Theunitisplacedinanenclosedenvironment
where there is sufficient bass reflecting
off surfaces like from boundary walls – for
example on bathroom counter tops, in small
bedrooms or dorms.
(cont.)