2
Getting Started
1
1
Installing Your Creative WebCam
1. Do not connect Creative WebCam Instant to your computer before installing the
drivers. If you accidentally begin installation with Creative WebCam Instant connected
and the Add New Hardware Wizard or Found New Hardware Wizard dialog
box appears, click the Cancel button.
2. Insert the Installation and Applications CD into your CD-ROM/DVD-ROM drive.
Your CD should start automatically. If it does not, follow the steps below:
i. Double-click the My Computer icon.
ii. Right-click the CD-ROM/DVD-ROM drive icon, and then click Autoplay.
3. Click the options for installing drivers and applications.
4. Follow the instructions on the screen to complete the installation.
You may be asked, after an application is installed, if you want to restart your computer.
Select No until all the drivers and applications are installed.
5. Place your Creative WebCam Instant on top of your computer monitor or other flat
surface. For LCD flat panel monitors or notebook computers, use the integrated
hinged lever to balance the Creative WebCam (see Figure 2).
Figure 2
CLA WC Instant.fm Page 2 Wednesday, August 24, 2005 5:28 PM
To Next Page
Loading...
