Do you have a question about the Creative Video Blaster WebCam Go and is the answer not in the manual?
Resolution | 352 x 288 |
---|---|
Frame Rate | 30 fps |
Interface | Parallel |
Lens | Fixed focus |
Microphone | Built-in |
Image Sensor | CMOS |
Max. Video Resolution | 352 x 288 |
Sensor | CMOS |
Focus Type | Fixed |
Cable Length | 1.5 m |
Compatibility | Windows 98 |
Control application for camera functions like taking pictures and recording video.
Application for motion detection and automated snapshots for security.
Minimum and optimal hardware/software specifications for WebCam Go.
Lists the hardware items included in the WebCam Go package.
Explains the physical features of the WebCam Go camera.
Instructions for installing the necessary drivers and software for WebCam Go.
Steps to confirm that the WebCam Go has been installed correctly in the system.
How to launch the main control application for the WebCam Go.
Guide on adjusting the camera lens for clear image focus.
Instructions on choosing the correct video capture device within the software.
Steps for capturing still images using the WebCam Go Control application.
Guide on using the camera independently from the computer for photography.
Detailed steps for focusing the camera lens for sharp images.
How to transfer pictures from the camera to a computer.
Lists the key hardware features and technical specifications of the WebCam Go.
Details supported operating systems and driver types for WebCam Go.
Lists the available image resolutions for both video and still modes.
Solutions for issues where the WebCam Go setup program does not run.
Troubleshooting steps for common problems encountered while using the camera.
Resolves problems caused by USB port resource conflicts and IRQ issues.
Details required for contacting support, like product serial number and system configuration.
Step-by-step instructions for sending the product back for repair or replacement.
Specifies exclusions from the product's warranty coverage.