Creative WP-300 User Manual

Creative WP-300 User Manual.
(Model number EF0450)
Illustration1 Illustration2
Thank you for selecting Creative’s PURE WIRELESS Headphones. This documentation aims to guide you in
making full use of the headphones. Fully charge the headphones before first use. Then you need to “pair”
the headphones once with your Bluetooth audio device before enjoying subsequent automatic playback.
Charging headphones
• Connect the Left earcup to your laptop or computer using the supplied USB cable
• On the Left earcup, the indicator lights up in Red. When fully charged, this indicator turns Green
• You can listen and operate the headphones while charging
Pairing new audio devices
• Press and hold the Power/Pair button for more than 4 seconds on the Right earcup until the indicator
lights up in Blue and blinking rapidly
• Turn on Bluetooth search function on your audio device
• Select “Creative WP-300 Headphones” and if prompted for a Passcode, key in “0000”
• Once paired, the Blue indicator on the Right earcup blinks slowly
Playback from audio devices
• Turn on Bluetooth function on your paired audio device
• Press and hold the Power/Pair button on the Right earcup until the indicator lights up in Green and blinks
slowly. The headphones automatically searches for the last paired device. Once connected, the indicator
turns Blue and blinks slowly. In certain cases, you may need to press the Play button to establish
connection.
• You can now Play or Pause music playback, skip forward or reverse tracks, and make volume
adjustments
Clear or reset headphones
• Press and hold the Volume Down "-" and Power/Pair buttons for more than 6 seconds to clear the paired
audio devices
• If the headphones malfunction, reset it by supplying USB power, then press the Volume Up "+" and
Power/Pair buttons for about 1 second
Automatic shutdown
• Once the headphones are powered on, if it is unable to connect to the last paired device or failed to pair
with a new device within 5 minutes, the headphones will automatically shut down.
1
2
3
4
5
7
6

Creative WP-300 Specifications

General

Impedance	32 Ω
Driver unit	34 mm
Magnet type	Neodymium
Ear coupling	Supraaural
Headphone frequency	18 - 22000 Hz
Headphone sensitivity	102 dB
Battery voltage	3.7 V
Bluetooth	Yes
Connectivity technology	Wireless
Recommended usage	Calls/Music
Microphone type	Built-in