Frequently Asked Questions 63
I have to recharge Zen Vision’s battery quite often. Is there anything I can do
to make it last longer?
Generally, any operation requiring Zen Vision to access the hard disk uses battery power.
Consequently, filling your player to capacity is not recommended. However, some
operations consume more battery power:
■ a long backlight timeout setting. A shorter timeout conserves battery power.
■ a high contrast setting. Position the player so that you can read the display without using a high
contrast setting.
■ fast-forwarding or rewinding
■ turning the player on and off too many times
■ prolonged use at high volumes
■ enabling equalization presets
How do I reset Zen Vision?
1
Disconnect Zen Vision’s power adapter and turn off the power outlet.
2 Remove the battery.
3 Wait five seconds before reinserting the battery.
NOTE
For the latest firmware updates to improve Zen Vision’s functionality, go to
www.creative.com and select Downloads.
NOTE
Insert the battery within one minute to retain the current date and time settings in your
player.
To Next Page
Loading...
