Creative ZiiSound D3x - Page 18

B
17
**FortheZiiSoundD3x,PoweredONisindicatedwiththeVolumeLEDStatusIndicatorlitup.
Restoring LINK for linked speaker usage
TorestoretheLINKfromthesetsofindividualspeakers,youcanPresstheLINKButtononceon
eitheranyofthespeakerswithallotherD3x(s)andsubwooferPoweredON**.Thiswillresultin
restoringthestateofthespeakersshownbyitLEDindicationineitherMulti-channelorParty
mode.
4.3
Reset to factory setting / clear LINK system
FollowthesestepstoreturntofactorysettingsallD3x(s)toclear Bluetooth paired device memory and
LINKsystemwhenachangeofspeakercongurationisrequired.
(Forexample,linkingadditionalD3xorDSx)
Note:TheabovecanalsobeappliedtoLEFTandCENTERspeakertoclear Bluetooth paireddevicememoryandLinkcongurations
should the need arise.
Action LED status Status
ZiiSound D3x
ReturnthespeakertoStandbybypressingthe
Power ON/ Standby button.
PressandholdPowerbuttonfor10seconds.
CONNECTLEDandLINK
LEDblinkstwiceand
turnsoff.Thisindicatesa
successful Factory reset.
PoweredOn.SpeakerBlu-
etoothdevicelistandLink
system memory cleared.
Readyfornextuseraction