Creator C310+ - Page 15

Creator C310+ BM Multi-system Scanner
15
engine off (KOEO) or with the key on engine
running (KOER).
◆Trouble codes cause the control module to
illuminate the malfunction indicator lamp (MIL)
when emission-related fault occurs.
select
[Read Trouble Code]
and press
[ ]
in
[
Diagnostic
Menu]
.
If there are some codes, the screen will display
the codes as show below:
Press
[ ]
or
[ ]
to return the
[Diagnostic menu]
View DTCs and their definitions on screen.

If there are no Diagnostic Trouble Codes present, the
display indicates “No Trouble Code
” Wait a few
seconds or press any OK to return to Diagnostic Menu.

The control module number, sequence of the DTCs, total
number of codes detected and type of cod
es (Generic or
Manufacturer specific) will be observed on the upper
right hand corner of the display.