Page 6
TIME
If you are tuned to an FM station with RDS, it will normally transmit the real time. The default RDS
info shown in the screen does not include TIME. To show time on the display from the front panel
controls, press INFO once. From the Remote control handset, press TIME or INFO buttons once.
Note: if the FM signal is not strong enough to show RDS data, TIME cannot be displayed.
INFO, operates in Tuner mode to display the different pages of information available from the tuner
and RDS data. To display the different pages, it is necessary to toggle the INFO button several times
to call-up: Pre-Set number, Frequency, Tuner metrics, (PS, RT, CT, see DISPLAY for details)
STEREO/MONO
RUBY automatically adjusts the Left/Right separation to maintain good signal to noise ratio. If the
signal strength is not high enough, Stereo will blend proportionally into MONO. The infinity symbol
∞ will be displayed when full stereo operation is in operation. MONO operation will display O
instead.
OPERATION FROM THE EVO REMOTE CONTROL
TUNER. Press the green TUNER button to switch to tuner. Green buttons on the remote are
exclusively for Tuner functions, but many others are also functional without having to press the
green TUNER button first. Here is a list of remote operation buttons:
Green buttons
LEVEL is not operational in this model.
BAND has no function as the RUBY is FM only.
MODE switches between PREset mode and TUNE mode.
MONO manually forces the FM tuner into mono in three stages, for when an FM stereo signal may
be too noisy to listen in Stereo. The RUBY Tuner will automatically adjust the amount of stereo
separation, from full stereo to mono, to maintain a good signal to noise.
Other colour buttons
DIM changes between three levels of display brightness. Display off is not possible.
NUMBERIC buttons 0-9
1. To tuner directly to a frequency.
2. To go directly to a Pre-set address
Numeric frequency entry: To enter a known station frequency directly, press the exact
numbers, without a decimal point, i.e. to tune to 101.1 MHz FM, enter 1011, or to tune to 909 kHz
To Next Page
Loading...
