Crenova MS8233D - Electrical Specification

● Auto Power OFF: If the meter is idle for 15 minutes (idle time), the meter
automatically turns off. After auto power-off, pushing any of the push button
or changing the rotary switch can turn on the meter again.
NOTE:（1）After auto power off in the AC mode, if changing the rotary switch to
the DC mode, the Re-power on if disabled.
(2) The meter enters sleep mode after quto power off. If press
“HOLD” push button to re-power on in the sleep mode, the auto
power off function is disabled.
● Operating temperature & Humidity:
0 ~ 40℃ (32 ~104 ℉) & < 80% RH
● Storage temperature & Humidity:
-10 ~ 50℃ (14 ~ 122 ℉) & <70%RH
● Power Supply: 9V Battery(6F22 or 1604A Type) x 1pc.
● Safety Class: IEC 61010-1, CAT II 600V.
● Dimension(L x W x H) & Weight:140 x 67 x 30mm, Approx. 112g
4.1.1 Accessary:
1. User’s Manual ---------------------------- 1pc
2. Test lead ---------------------------- 1set
3. 9V Battery ------------------------------ 1pc
4-2. Electrical Specification ( at 23±5℃; <75% RH)
4.2.1 DC Voltage
Range
Resolution
Accuracy
200mV
0.1mV
±（0.5% rdg + 2dgt）
2V
0.001V
20V
0.01V
200V
0.1V
600V
1V
±（0.8% rdg + 2dgt）
* Over load protection: Maximum 600V DC or AC RMS
4.2.2 AC Voltage
Range
Resolution
Accuracy
5