2
CONGRATULATIONS !
Congratulations on being the owner of a Cress electronic kiln! Besides having the safety and reli-
ability that has long been associated with the Cress name, the kiln you have selected is equipped
with the best electronic control on the market. We are pleased to offer a control with a wider
range of automatic firing speeds which will do almost any firing job without the need for custom
programming. This control also includes a short temperature soak at the end of each firing cycle
to ensure greater temperature uniformity with uneven loads. There is considerably more insula-
tion between the heat and the electronics to ensure high reliability, and a safety master switch is
included to protect against power surges when the kiln is not in use.
We are proud of our products and gratified that you have joined the many thousands of ceramic
enthusiasts who have compared and chosen Cress firing equipment. We sincerely wish you many
years of creative and rewarding use of your Cress kiln.
UNPACK SHIPMENT IMMEDIATELY
When this shipment was given to the carrier, neither the crating nor contents were damaged, In case of
damage or loss (either obvious or concealed) save all packing material. Concealed damage or loss discov
-
ered by the consignee, which was not noted at time of delivery, must be reported to the delivering carrier
immediately upon discovery. At that time, an inspection of the merchandise by the carrier’s representative
should be requested. Failure to report such a damage or loss within 15 days places the burden of proof
upon the claimant to show this damage or loss was caused while in the carrier’s possession.
To Next Page
Loading...