Cressi AC2 - XS Compact, Disassembly and Servicing

81
ENGLISH
2.8 - XS Compact, disassembly and servicing
When designing the XS Compact regulator, particular attention
was paid to the disassembly and servicing phases, which can al-
ways be carried out in utmost safety thanks to its innovative fea-
tures that make all servicing phases easier, as maintenance is
crucial to always have a perfectly serviced, calibrated, and high-
performing device.
� WARNING: intermediate pressure must be set only at
authorized Cressi-sub centres, while the setting values can
NOT and must NOT be modified by the user, in order not to
affect the regulator’ s performance. Cressi-sub decline any
responsibility for any intervention carried out by unauthorized
personnel.
You can find your authorized Cressi-Sub center by
asking your dealer, or Cressi Sub S.p.A. itself
(email: info@cressi-sub.it).
NOTE: we recommend to have the regulator completely serv-
iced yearly or even oftener in case of intensive use; only origi-
nal Cressi-sub spare parts are to be used.
The unique bayonet mount lock system of the cap allows the
case to be easily opened and closed, and at the same time it
locks cap and seal in all safety and precision; there is no mechanic
coupling thread as in most other regulators on the market, that
may cause problems affecting their performances. Moreover, a
specially sized mechanic insert guarantees the regulator to be
safely and precisely locked.
Opening and locking a common circular seal case regulator has
never been so easy as well as so safe. Every operation of check-
ing, servicing and setting of the second stage is made easier and
faster.
To reach this goal, we designed a revolutionary patented cap on
the device side, which avoids using a threaded coupling. The
valve as well can be serviced and set in an extremely easy way
guaranteeing the second stage utmost performance and perfect
tightness.
� WARNING: the second stage can be opened, disassem-
bled and set only and exclusively at authorized Cressi-sub
centres; the setting values CANNOT and MUST NOT be varied
by the user, so as not to affect the device performances. We
decline any responsibility for any operation carried out by
unauthorized personnel.
NOTE: we recommend to have the regulator completely serv-
iced yearly or even oftener in case of intensive use; only origi-
nal Cressi-sub spare parts are to be used.
Visit our site www.cressi.com: you will find more information about
our equipment.
fig. 17
fig. 16
SECOND STAGES