57
ENGLISH
� WARNING: intermediate pressure adjustment should only
be carried out by authorised Cressi-sub centres and the cali-
bration values CANNOT and MUST NOT be changed by the
user, to avoid prejudicing the good working order of the regu-
lator. We cannot be held in any way liable for any intervention
carried out by staff unauthorised by Cressi-sub.
The Cressi-Sub authorised centres can be indicated by retailers
or, alternatively by Cressi Sub s.p.a. (email: info@cressi-sub.it).
The T10 first stage therefore can be used in cold water (with a
water temperature under 10 °C), since it complies with Directive
89/686/EEC dated 21/12/1989, checked and certified by the Test
Authority No. 0474 RINA located in Genoa, tested in compliance
with standard EN 250:2014 that establishes the Personal protec-
tive Equipment (PPE) category III, requirements and therefore
outlines the CE marking followed by identification of the certifica-
tion authority (0474) pursuant to Art. 11A of the Directive
89/686/EEC.
The considerable technical solutions, combined with the high
quality of the materials used, ensure that this first stage regulator
is fully reliable and capable of providing the highest performance
extended over time.
Additional important information relating to our equipment can be
found on the website www.cressi.com
FIRST STAGES
To Next Page
Loading...
