32
CHANGING THE BATTERY
Follow these steps to replace the battery:
1. Remove the smart cover.
2. Use a coin of appropriate thickness to unscrew the battery
compartment cover on the back of the DIGI 2 console.
4. Gently insert a pointed object (a small flat-head screwdriver) into
the cavity, and carefully and delicately lever up the used battery.
3. Change the O-ring on the closure cap with a new one, and
grease it lightly, using silicone grease ONLY.
P80-DIGI 2.indb 32 13/06/19 14:01
To Next Page
Loading...
