IMPORTANT! Do not exceed the equipment operating limits.
The pressure gauge is certified for use at pressure no greater than
300 bar. The maximum operating pressure of the gauge is shown
on the back of the instrument. Failure to take these precautions
can result in serious injury or even death.
IMPORTANT!Do not exceed the equipment operating
limits. Keep in mind that open-circuit compressed-air diving
apparatuses are certified to 50 m in depth under standard EN
250:2014. The purpose is to ensure a minimum level of safe
operation for the device to a maximum depth of 50 m, given
that teaching methodologies set a maximum depth of 40 m for
recreational dives, and exclude the performance of any type of
underwater work.
E1124L1155-Manuale DIGI - 21_ENG.indd 21E1124L1155-Manuale DIGI - 21_ENG.indd 21 30/07/21 13:5330/07/21 13:53
21
EN
P124-20210630A
To Next Page
Loading...
