INTRODUCTION
AND MAIN FEATURES
Congratulations!
Cressi Sub S.p.A. thanks you for your purchase of a DIGI console.
This is a sophisticated and complete instrument, designed in our
Research and Development Department and manufactured in the
Cressi Sub S.p.A. facilities in Italy to guarantee maximum efficiency
and reliability for sporting and recreational divers.
The DIGI console is a modern digitally-inspired interpretation of an
analog pressure gauge.
WARNING! Cressi Sub S.p.A. recommends that the DIGI
console be used only by those who have successfully completed
a diving course and who have obtained the required diving license
at the end of said course.
HOW TO CONNECT THE DIGI CONSOLE
WARNING! Whenever assembling or disassembling the
regulator, make sure that it is not mounted to the tank valve. In
the event that it is, make sure that the first stage/regulator unit is
completely depressurized.
First, unscrew and remove the cap marked HP (7/16 UNF" thread)
from the unpressurized 1st stage. Then, after checking that both the
regulator housing and the hose O-ring are clean, manually screw the
instrument's HP hose to the regulator 1st stage, and then tighten with
an appropriate size wrench or crescent wrench, taking care not to
exceed torque of 8 Nm.
IMPORTANT!If you have difficulty connecting/mounting
the DIGI console, you must have this done for you by a Cressi
Sub S.p.A. qualified technician or your trusted merchant, so long
as they are certified and authorized to work on Cressi Sub S.p.A.
equipment.
WARNING! Cressi Sub S.p.A. declines all responsibility for any
malfunction and/or damage resulting from incorrect or improper
connection/assembly of the DIGI console to the first stage/
regulator unit!
IMPORTANT!Cressi Sub S.p.A. recommends that you
arrange the DIGI console within your preferred configuration in
an optimal hydrodynamic position using the fasteners provided to
prevent accidental knocks or snags.
WARNING! Do not dive if the DIGI is not correctly connected
to a pressurized scuba unit.
E1124L1155-Manuale DIGI - 21_ENG.indd 23E1124L1155-Manuale DIGI - 21_ENG.indd 23 30/07/21 13:5330/07/21 13:53
23
EN
P124-20210630A
To Next Page
Loading...
