Cressi ISUP - Accessory Installation; U.S. Fin Systems

8
Accessories
Once the SUP has been inated, you can go on assembling the accessories, including
ns. Identify your fastening system and follow your model’s diagram to fasten the n.
Repeat in reverse to extract it.
WARNING
Sharp back of the n, handle with care
Insert the plate inside the base from the center towards the end with the help of the threaded pin
(Fig. 1). Place the end of the n in the base and slide it until aligning the pin with the plate (Fig. 2).
Screw the threaded pin clockwise until it stops (Fig. 3).
U.S. ns with screw
21
Fastening
3
Insert the pad into the corresponding n’s slots and place the end of the n into the base (Fig.
1). Slide in (Fig. 2) and rotate the n until it stops (Fig. 3). Add pads to increase the grip of the n.
U.S. QUICK ns with pads
21
Fastening
3