P111-SROM20220812A
21
Service and Repair Operative Manual
LEONARDO
17 Leonardo
This manual is reserved for authorized Cressi-sub Service Centers. The repair, maintenance, overhaul, calibration, and any other operation performed on regulators must be done exclusively by trained
Cressi-sub Authorized Center personnel. Cressi-sub declines all responsibility for operations performed on regulators by anyone not authorized and specifically trained by Cressi-sub itself.
Assembly of outer protective seal
Insert the tip of a flathead screwdriver under the arch
of the protective seal (1).
Turn the screwdriver while levering on the upper
back side of he computer as shown in the picture (2).
Repeat for the other side.
To Next Page
Loading...
