P111-SROM20220812A
2 31
Service and Repair Operative Manual
LEONARDO
18
Leonardo
This manual is reserved for authorized Cressi-sub Service Centers. The repair, maintenance, overhaul, calibration, and any other operation performed on regulators must be done exclusively by trained
Cressi-sub Authorized Center personnel. Cressi-sub declines all responsibility for operations performed on regulators by anyone not authorized and specifically trained by Cressi-sub itself.
Assembly of plastic protective seal
Position the tabs on the underside one at a time (1). Apply pressure to insert the second tab as shown in the photo (2).
Press down the protective seal as shown in the photo (3).
To Previous Page
Loading...
