Crest Audio CD Series - Output; Stereo Parallel; Input

p.18
CD owner’s manual
connections
5
inputs
CD amplifiers are configured standard with pin 2 hot on XLR inputs.
outputs
Speakers are connected using the high-current five-way binding posts,
speakon connectors,or both.
see—operation modes
Very high current is
available at the outputs.
Please connect your
output cable to the + and
- terminals of each sec-
tion precisely as shown.
a
stereo/parallel
female
XLR
bridged mono
TRS pinouts
A and B channel
Speaker + to PIN 1+
Speaker - to PIN 1-
A channel also has
B channel + to PIN 2+
B channel - to PIN 2 -
Note:This is useful in
bi-amp monitor situations
A Channel ONLY
Speaker + to PIN 1+
Speaker - to PIN 2+