p.28
NexSys Modules
7
7 Fault LEDs
Each channel has a fault LED on the module panel. If one or more of a
channel’s faults is triggered,this LED will illuminate. A fault code will also
appear in the display.
8 Mute LEDs
Each channel has a mute LED that will illuminate if the channel is muted
through the control software.
9 Option Window
This space,shipped standard with a blanking panel installed,can accom-
modate various add-on options to the network module including the
NxDSP signal processing module.
0 RJ-45 Network Connector
The Neutrik
®
EtherCon
®
ruggedized RJ-45 connector allows connec-
tion of the CKi amplifier to an Ethernet network.The jack accommo-
dates a standard male RJ-45 connector or the male EtherCon
®
con-
nector.
¡ Data & Link LEDs
The Data LED will flash when data packets are being sent or received
by the module.
The Link LED will light when the module detects that it is connected
to an Ethernet network.
NxCobranet
The NxCobranet module varies in appearance only in the fact that
above the RJ-45 connection NxCobraNet appears instead of
NxEthernet.
To Next Page
Loading...
