Need help?Do you have a question about the Crest Audio CPX Series and is the answer not in the manual?
General| Signal to Noise Ratio | >100 dB |
|---|---|
| Inputs | XLR, 1/4" TRS |
| Outputs | Binding posts, Speakon |
| Topology | Class H |
| Input Impedance | 20k Ohms |
| Cooling | Variable speed fan |
| Protection | Thermal, short circuit, DC, overload |
| Dimensions | 3.5" (89 mm) x 19" (483 mm) x 15.25" (387 mm) |
| Power Requirements | 50/60Hz |
Lists core features: GCL, voltage selector, dual fans, crossover, LEDs, and high-pass filter.
Details when professional service is needed and provides contact information for repairs.
Crucial advice for safe and correct operation of the amplifier.
Explains the forced-air cooling system and necessary air supply.
Describes the standard IEC connector and the AC mains cord requirements.
Details the switch for selecting primary voltage for the power transformer.
Explains Gain Comparator Limiting and the bridge mode selector switch.
Explains bridging channels for a powerful single-channel monaural output.
Advises on preventing speaker damage from power, clipping, and frequencies.
Lists output power ratings for stereo and bridge modes at various impedances.
To Next Page
