Crestron 4K DigitalMedia DMPS3-4K-350-C-AIRMEDIA User Manual

DO GUIDE
DMPS3-4K-350-C/DMPS3-4K-350-C-AIRMEDIA Rear Panel Connections
DO Determine the Address of the Device
The device can be addressed using the hostname. The default hostname is DMPS3-xxxxxxxx, where xxxxxxxx consists of the last eight characters (excluding
punctuation) of the MAC address. For example, if the MAC address is 00:10:7F:08:09:AA:05, the default hostname is DMPS3-0809AA05. The MAC address is
labeled on the shipping box and rear panel of the device.
Alternatively, the device can be addressed using the IP address. By default, DHCP is enabled. To set a static IP address, use any of the following:
• Crestron Toolbox™ software on a PC that connects to the device via the Ethernet network
NOTE: The Device Discovery Tool can be used to nd the current IP address.
• A USB connection to the COMPUTER port on the front panel of the device
• The front panel LCD display menu
DMPS3-4K-250-C/DMPS3-4K-350-C Series
3-Series
®
4K DigitalMedia™ Presentations Systems
DO Install the Device
The Crestron
®
DMPS3-4K-250-C, DMPS3-4K-350-C, DMPS3-4K-250-C-AIRMEDIA, and DMPS3-4K-350-C-AIRMEDIA can be mounted into a rack or placed
onto a at surface.
Mount into a Rack
The DMPS3 devices each occupy 3U of rack space. Using a #1 or #2
Phillips screwdriver, attach the two included rack ears to the device.
Then, mount the device into the rack using four mounting screws
(not included).
Place onto a Flat Surface
When placing the device onto a at surface or stacking it with other
equipment, attach the included feet near the corners on the underside
of the device.
DO Connect the Device
Connect the device as required for the application.
DMPS3-4K-250-C/DMPS3-4K-250-C-AIRMEDIA Rear Panel Connections
DO Check the Box
QUANTITY ITEM PART NUMBER
2 Bracket, Rack Ear, 3U 2033588
1 Cable, USB 2.0, A - B, 6' (1.83 m) 2014966
3 Connector, 2-Pin 2012361
1 Connector, 3-Pin 2003575
4 Connector, 4-Pin 2003576
15 Connector, 5-Pin 2003577
2 Connector, 8-Pin 2003580
4 Foot, 0.5" x 0.5" x 0.23", Rubber 2002389
1 Power Cord, 6' 7" (2 m) 2001134
6 Screw, 6-32 x 5/16", Undercut Head, Phillips 2007223
Rack Ear Attachment
L R L R L R
L R
L R
L R
L R
L R
IR IN:
From
CNXRMIRD
IR receiver
IR - SERIAL OUT 1-4:
To IRP2 IR emitter probe
or one-way serial
controlled devices
RELAY 1-4:
To
controllable
devices
COM A and COM B:
To RS-232 devices
NET:
To Cresnet
®
devices
PoDM+
INPUT PWR:
From Crestron
PoDM+ power
supply
1
100-240V~6.0A
50/60 Hz:
From ac
power outlet
Ground
INPUT 1-4:
From sense output of
digital output devices
(24 volts maximum)
SERVICE:
For factory
use only
MC/LN 1-6:
From balanced
microphone/
line-level
audio sources
HDMI INPUTS 1-6:
From HDMI
®
audio/video sources
AUD IN 1-5:
From balanced/
unbalanced stereo
line-level analog
audio sources
DM INPUT:
From DM 8G+
®
output of DM
®
transmitter or
other DM
device or from
HDBaseT
®
device
1
HDMI
OUTPUT:
To HDMI
display
DM OUTPUT:
To DM 8G+
input of DM
receiver or
other DM
device or to
HDBaseT
device
1
CONTROL
SUBNET:
To Crestron
local
network
device
1
PROG OUT:
Audio output to
amplier or
amplied speakers
AUX OUT 1-2:
To video
teleconferencing
or codec input
SPEAKER OUTPUT
CLASS 2 WIRING:
To 4-ohm/8-ohm
stereo speakers or
70-volt/100-volt
mono speakers
LAN:
10BASE-T/
100BASE-TX/
1000BASE-T
Ethernet to
LAN
CONTENT
LAN:
10BASE-T/
100BASE-TX
Ethernet to
LAN for
AirMedia or
H.264 content
input (optional)
2
L R L R L R
L R
L R
L R
L R
L R
IR IN:
From
CNXRMIRD
IR receiver
IR - SERIAL OUT 1-4:
To IRP2 IR emitter probe
or one-way serial
controlled devices
RELAY 1-4:
To
controllable
devices
COM A and COM B:
To RS-232 devices
NET:
To Cresnet
devices
PoDM+
INPUT PWR:
From Crestron
PoDM+ power
supply
1
100-240V~6.0A
50/60 Hz:
From ac
power outlet
Ground
INPUT 1-4:
From sense output of
digital output devices
(24 volts maximum)
SERVICE:
For factory
use only
SPEAKER OUTPUT
CLASS 2 WIRING:
To 4-ohm/8-ohm
stereo speakers or
70-volt/100-volt
mono speakers
MC/LN 1-6:
From balanced
microphone/
line level
audio sources
HDMI INPUTS 1-6:
From HDMI
audio/video sources
AUD IN 1-5:
From balanced/
unbalanced stereo
line-level analog
audio sources
DM INPUTS:
From DM 8G+
output of DM
transmitter or
other DM
device or from
HDBaseT device
1
HDMI
OUTPUTS:
To HDMI
displays
DM OUTPUTS:
To DM 8G+
input of DM
receiver or
other DM
device or to
HDBaseT
device
1
CONTROL
SUBNET:
To Crestron
local
network
device
1
PROG OUT:
Audio output to
amplier or
amplied speakers
AUX OUT 1-2:
To video
teleconferencing
or codec input
LAN:
10BASE-T/
100BASE-TX/
1000BASE-T
Ethernet to
LAN
CONTENT
LAN:
10BASE-T/
100BASE-TX
Ethernet to
LAN for
AirMedia or
H.264 content
input (optional)
2

Crestron 4K DigitalMedia DMPS3-4K-350-C-AIRMEDIA Specifications

General

Type	DigitalMedia Presentation System
Model	DMPS3-4K-350-C-AIRMEDIA
Category	Projector Accessories
Resolution Support	4K
Audio Inputs	Analog, Digital
Audio Outputs	Analog, Digital
Control	Ethernet, RS-232, IR
Inputs	Multiple video and audio inputs
Outputs	Multiple video and audio outputs
Power Supply	100-240V AC, 50/60 Hz
Video Inputs	HDMI, VGA
Video Outputs	HDMI
Features	AirMedia
Wireless Connectivity	AirMedia

Summary

Install the Device

Mount into a Rack

Attaching the included rack ears to the device and mounting it into a rack using four screws.

Place onto a Flat Surface

Attaching the included feet near the corners on the underside of the device for flat placement.

Connect the Device

Input and Output Connections

Overview of various input and output ports for audio, video, serial, network, and control connections.

Determine the Address of the Device

Configure the Device

Enable AirMedia Presentation Gateway

Steps to activate the AirMedia presentation gateway license for specific DMPS3 models.

Connect to the Crestron XIO Cloud Service

Route the Inputs

Instructions for routing inputs using the web interface or front panel push button controls.

Learn More