Crestron HD-PS402 User Manual

The HD-PS402 provides a 4K60 4:4:4 AV presentation system with
enhanced HDMI® video switching and audio presentation capabilities for
areas such as conference rooms and classrooms. The HD-PS402 includes
four HDMI inputs and two HDMI outputs with mirrored DM Lite®
outputs.
In the Box
1 HD-PS402 AV Presentation System
Additional Items
1 Power Cord, 6 ft 7 in. (2 m) (2001134)
2 Bracket, Rack Mount, 1 RU (2032122)
4 Connector, 3-Pin (2003575)
2 Connector, 5-Pin (2003577)
6 Screw, 4-40 x 5/16 in., Pan Head, Phillips, Black (2007164)
Install the Device
The device occupies 1 RU of rack space in a 19-inch equipment rack.
WARNING: To prevent bodily injury when mounting or servicing the
unit in a rack:
l
When mounting the unit into a partially filled rack, load the rack
from the bottom to the top with the heaviest component at the
bottom of the rack.
l
If the rack is provided with stabilizing devices, install the stabilizers
before mounting or servicing the unit in the rack.
HD-PS402
QuickStart
4x2 4K60 4:4:4 HDR Presentation System
1

Crestron HD-PS402 Specifications

General

Type	Power Supply
Input Voltage	100-240 VAC
Frequency	50/60 Hz
Operating Temperature	0° to 40° C
Storage Temperature	-20°C to 60°C
Humidity	10% to 90% non-condensing

Summary

Install the Device

Rack Mounting Safety Precautions

Connect the Device

Front Panel Connections

Overview of the front panel controls and indicators, including PWR, SETUP, AUTO, INPUT, and FOLLOW buttons and LEDs.

Rear Panel Connections

Balanced/Unbalanced Audio Output

Upgrade the Firmware

Configure the Device

Connect to the Cloud

Observe the LED Indicators

Visit the Product Page

Provides a QR code and URL to access the official product page for the HD-PS402.

Additional Information