Crestron HD-PS402 - Observe the LED Indicators; Visit the Product Page

Observe the LED Indicators
Refer to the following table for information about the LED indicators on
the device.
LED Indicator Color Meaning
PWR Amber Power is being applied to the device.
Thedeviceis booting.
Green Power is being applied to the device.
Thedeviceis operational.
AUTO Green Automatic switching is enabled.
SETUP Red
The SETUP button is pressed.
INPUT 1-4 Green The corresponding input is routed to
an output.
Amber A source is detected at the
corresponding input but is not routed
to an output.
OUTPUT 1-2 Green The corresponding output is
transmitting video.
Amber The corresponding output is detected
but no video is routed.
FOLLOW Green Follow Output mode is enabled, which
causes the selected HDMI input to be
routed to HDMI and DM Lite outputs 1
and 2 simultaneously.
Ethernet Green A 100BASE-TX link is established.
Amber A 1000BASE-T link is established.
Flashing amber Data activity is occurring on the
Ethernet link.
DM Lite
OUTPUT
Green A DM Lite link is established.
Flashing amber Non-HDCP video is detected.
Solid amber HDCPvideo is detected.
Visit the Product Page
Scan the QR code to visit the product page.
HD-PS402
www.crestron.com/model/6511415
7
HD-PS402
QuickStart
4x2 4K60 4:4:4 HDR Presentation System